Powered by Universal Speech Solutions LLC

 MRCP

Julius Plugin

Administrator Guide

 

Revision: 5

Distribution: Red Hat / Cent OS

Created: February 3, 2017

Last updated: August 30, 2017

Author: Arsen Chaloyan


 

Table of Contents

                     

1  Overview.. 3

1.1         Applicable Versions. 3

1.2         Supported Distributions. 3

1.3         Authentication. 3

2  Installing RPMs Using YUM.. 4

2.1         Repository Configuration. 4

2.2         Repository Verification. 4

2.3         Julius Plugin Installation. 5

3  Installing RPMs Manually. 6

3.1         Package List 6

3.2         Package Installation Order 7

4  Obtaining License. 8

4.1         License Type. 8

4.2         Node Information. 8

4.3         License Installation. 8

5  Configuring Server and Plugin. 9

5.1         Plugin Factory. 9

5.2         Logger 9

5.3         Julius. 9

6  Validating Setup. 10

6.1         Launching Server 10

6.2         Launching Client 10

 


 

1       Overview

This guide describes how to obtain and install binary packages for the Julius plugin to the UniMRCP server on Red Hat-based Linux distributions. The document is intended for system administrators and developers.

1.1      Applicable Versions

Instructions provided in this guide are applicable to the following versions.

 

UniMRCP 1.5.0 and above

UniMRCP Julius Plugin 1.0.0 and above

1.2      Supported Distributions

UniMRCP binary packages are currently available only for x86_64 (64-bit) architecture.

 

Operating System

32-bit

64-bit

Red Hat / Cent OS 6

 

box_info.png

Red Hat / Cent OS 7

 

box_info.png

 

Note: packages for other distributions can be made available upon request. For more information, contact services@unimrcp.org.

1.3      Authentication

UniMRCP binary packages are available to authenticated users only. In order to register a free account with UniMRCP, please visit the following page.

 

https://www.unimrcp.org/profile-registration

 

Note: a new account needs to be verified and activated prior further proceeding.

 

2       Installing RPMs Using YUM

Using the Yellowdog Updater, Modifier (yum), a command-line package management utility for Red Hat-based distributions, is recommended for installation of UniMRCP binary packages.

2.1      Repository Configuration

The content of a typical yum configuration file, to be placed in /etc/yum.repos.d/unimrcp.repo, is provided below.

 

[unimrcp]

name=UniMRCP Packages for Red Hat / Cent OS-$releasever $basearch

baseurl=https://username:password@unimrcp.org/repo/yum/main/rhel$releasever/$basearch/

enabled=1

sslverify=1

gpgcheck=1

gpgkey=https://unimrcp.org/keys/unimrcp-gpg-key.public

 

[unimrcp-noarch]

name=UniMRCP Packages for Red Hat / Cent OS-$releasever noarch

baseurl=https://username:password@unimrcp.org/repo/yum/main/rhel$releasever/noarch/

enabled=1

sslverify=1

gpgcheck=1

gpgkey=https://unimrcp.org/keys/unimrcp-gpg-key.public

 

The username and password fields included in the HTTPS URI must be replaced with the corresponding account credentials.

2.2      Repository Verification

In order to verify that yum can properly connect and access the UniMRCP repository, the following command can be used.

 

yum repolist unimrcp

yum repolist unimrcp-noarch

 

where unimrcp and unimrcp-noarch are names of the sections set in the yum configuration file above.

 

In order to retrieve a list of packages the UniMRCP repository provides, the following command can be used.

 

yum --disablerepo="*" --enablerepo="unimrcp" list available

yum --disablerepo="*" --enablerepo="unimrcp-noarch" list available

 

2.3      Julius Plugin Installation

In order to install the Julius plugin package, including all the dependencies, use the following command.

 

yum install unimrcp-julius

 

In order to install the en-US model package for Julius, use the following command.

 

yum install unimrcp-julius-model-en-US

 

Note: this package provides acoustic data files required for the Julius engine to perform recognition for the en-US language. Packages for other languages can be made available upon request.

 

In order to install the additional data files for the sample client application umc, the following command can be used.

 

yum install umc-addons

 

Note: this package is optional and provides additional data which can be used for validation of basic setup.

3       Installing RPMs Manually

UniMRCP RPM packages can be installed manually using the rpm utility. Note, however, that the system administrator should take care of package dependencies and install all the packages in appropriate order.

 

The RPM packages have the following naming convention:

 

$packagename-$universion-$packageversion.el$rhelversion.$arch.rpm

 

where

·         packagename is the name of a package

·         universion is the UniMRCP version

·         packageversion is the RPM release version

·         rhelversion is the Red Hat version

·         arch is the architecture (x86_64, i686, …)

3.1      Package List

The following is a list of UniMRCP RPM packages required for the installation of Julius plugin.

 

Package Name

Description

unimrcp-julius

Julius plugin to the server.

unimrcp-julius-model-en-US

Julius en-US language files.

umc-addons

Sample en-US data files used with umc. [Optional]

unilicnodegen

Node information retrieval tool, required for license deployment.

unimrcp-server

Shared library and application of the server.

unimrcp-client

Shared libraries and sample applications of the client. [Optional]

unimrcp-demo-plugins

Set of demo plugins to the server. [Optional]

unimrcp-common

Data common for the client and the server.

uniapr

UniMRCP edition of the Apache Portable Runtime (APR) library.

uniapr-util

UniMRCP edition of the Apache Portable Runtime Utility (APR-Util) library.

unisofia-sip

UniMRCP edition of the Sofia SIP library.

 

3.2      Package Installation Order

Note that all the RPM packages provided by UniMRCP are signed by a GNU Privacy Guard (GPG) key. Before starting the installation, you may need to import the public key in order to allow the rpm utility to verify the packages.

 

rpm --import https://unimrcp.org/keys/unimrcp-gpg-key.public

 

Packages for the APR, APR-Util and Sofia-SIP libraries must be installed first.

 

rpm -ivh uniapr-$aprversion-$packageversion.el$rhelversion.$arch.rpm

rpm -ivh uniapr-util-$apuversion-$packageversion.el$rhelversion.$arch.rpm

rpm -ivh unisofia-sip-$sofiaversion-$packageversion.el$rhelversion.$arch.rpm

 

Then, a package containing common data for the client and the server, and a package for the server should follow.

 

rpm -ivh unimrcp-common-$universion-$packageversion.el$rhelversion.$arch.rpm

rpm -ivh unimrcp-server-$universion-$packageversion.el$rhelversion.$arch.rpm

 

Next, a package containing the utility tool unilicnodegen, required for license deployment.

 

rpm -ivh unilicnodegen-$toolversion-$packageversion.el$rhelversion.$arch.rpm

 

Next, a package containing the Julius plugin should follow.

 

rpm -ivh unimrcp-julius-$universion-$packageversion.el$rhelversion.$arch.rpm

 

Finally, one or more packages corresponding to a particular language should follow.

 

rpm -ivh unimrcp-julius-model-en-US-$universion-$packageversion.el$rhelversion.noarch.rpm

 

4       Obtaining License

The Julius plugin to the UniMRCP server is a commercial product, which requires a license file to be installed.

4.1      License Type

The following license types are available:

·         Trial

·         Production

·         Test and Development

4.2      Node Information

The license files are bound to a node the product is installed on. In order to obtain a license, the corresponding node information needs to be retrieved and submitted for generation of a license file.

 

Use the installed tool unilicnodegen to retrieve the node information.

 

/opt/unimrcp/bin/unilicnodegen

 

As a result, a text file uninode.info will be saved in the current directory. Submit the file uninode.info for license generation to services@unimrcp.org by mentioning the product name in the subject.

4.3      License Installation

The license file needs to be placed into the directory /opt/unimrcp/data.

 

cp umsjulius_*.lic /opt/unimrcp/data

 

5       Configuring Server and Plugin

5.1      Plugin Factory

In order to load the Julius plugin into the UniMRCP server, open the file unimrcpserver.xml, located in the directory /opt/unimrcp/conf, and add the following entry under the XML element <plugin-factory>. Disable other recognition plugins, if available. The remaining demo plugins might also be disabled, if not installed.

 

  <!-- Factory of plugins (MRCP engines) -->

  <plugin-factory>

      <engine id="Demo-Synth-1" name="demosynth" enable="true"/>

      <engine id="Demo-Recog-1" name="demorecog" enable="false"/>

      <engine id="Demo-Verifier-1" name="demoverifier" enable="true"/>

      <engine id="Recorder-1" name="mrcprecorder" enable="true"/>

      <engine id="JRecog-1" name="umsjulius" enable="true"/>

  </plugin-factory>

 

5.2      Logger

In order to enable log output from the plugin and set filtering rules, open the configuration file logger.xml, located in the directory /opt/unimrcp/conf, and add the following entry under the element <sources>.

 

    <source name="JULIUS" priority="INFO" masking="NONE"/>

 

5.3      Julius

The configuration file of the plugin is located in /opt/unimrcp/conf/umsjulius.xml and the data files are in the directory /opt/unimrcp/data/julius.

 

Refer to the Usage Guide for more information.

 

6       Validating Setup

Validate your setup by using the sample UniMRCP client and server applications on the same host. The default configuration and data files should be sufficient for a basic test.

6.1      Launching Server

Launch the UniMRCP server application.

 

cd /opt/unimrcp/bin

./unimrcpserver

 

In the server log output, check whether the plugin is normally loaded.

 

[INFO]   Load Plugin [JRecog-1] [/opt/unimrcp/plugin/umsjulius.so]

 

Next, check for the license information.

 

[NOTICE] UniMRCP Julius License

 

-product name:    umsjulius

-product version: 1.0.0

-license owner:   Name

-license type:    trial

-issue date:      2017-01-28

-exp date:        2017-02-27

-channel count:   2

-feature set:     0

 

Next, make sure that the Julius recognition server processes are normally started and the plugin can connect to them.

 

 [INFO]   Connected to JServer #0 Control Port localhost:10500 attempt 1

 [INFO]   Connected to JServer #1 Control Port localhost:10500 attempt 1

 [INFO]   Connected to JServer #2 Control Port localhost:10500 attempt 1

 [INFO]   Connected to JServer #3 Control Port localhost:10500 attempt 1

 

6.2      Launching Client

Note: the optional package umc-addons must be installed for this test to work.

Launch the sample UniMRCP client application umc.

 

cd /opt/unimrcp/bin

./umc

 

Run a typical speech recognition scenario by issuing the command run j1 from the console of the umc client application.

 

run j1

 

This command sends a RECOGNIZE request to the server and then starts streaming a sample audio input file callsteve.pcm to recognize.

 

Check for the NLSML results to be returned as expected.

 

<?xml version="1.0"?>

<result>

  <interpretation grammar="request1@form-level" confidence="1.00">

    <instance>call steve</instance>

    <input mode="speech">call steve</input>

  </interpretation>

</result>

 

Visually inspect the log output for any possible warnings or errors.

 

Note that utterances are stored in the var directory, if the corresponding parameter is enabled in the configuration file umsjulius.xml and/or requested by the client.