Powered by Universal Speech Solutions LLC


Watson SR Plugin

Administrator Guide


Revision: 5

Distribution: Debian / Ubuntu

Created: July 4, 2018

Last updated: March 15, 2021

Author: Arsen Chaloyan


Table of Contents

1 Overview.. 3

1.1 Applicable Versions 3

1.2 Supported Distributions. 3

1.3 Authentication. 3

2 Installing Deb Packages Using Apt-Get 4

2.1 Repository Configuration. 4

2.2 GnuPG Key. 4

2.3 Repository Update. 4

2.4 Watson SR Plugin Installation. 5

3 Installing Deb Packages Manually. 6

3.1 Package List 6

3.2 Package Installation Order 7

4 Obtaining License. 8

4.1 License Type. 8

4.2 Node Information. 8

4.3 License Installation. 8

5 Obtaining Service Credentials. 9

5.1 Watson Speech to Text API Subscription. 9

5.2 Installation of Credentials 9

6 Configuring Server and Plugin. 10

6.1 Plugin Factory Configuration. 10

6.2 Logger Configuration. 10

6.3 Watson SR Plugin Configuration. 10

7 Validating Setup. 11

7.1 Launching Server 11

7.2 Launching Client 11



1       Overview

This guide describes how to obtain and install binary packages for IBM Watson Speech Recognition (SR) plugin to the UniMRCP server on Debian-based Linux distributions. The document is intended for system administrators and developers.

1.1      Applicable Versions

Instructions provided in this guide are applicable to the following versions.


UniMRCP 1.5.0 and above

UniMRCP Watson SR Plugin 1.0.0 and above

1.2      Supported Distributions

UniMRCP deb packages are currently available for x86_64 (64-bit) architecture only.


Operating System


End of Support

Ubuntu 16.04 LTS (xenial)

July 2018

March 2021

Ubuntu 18.04 LTS (bionic)

May 2019


Ubuntu 20.04 LTS (focal)

March 2021



Note: packages for other distributions can be made available upon request. For more information, contact services@unimrcp.org.

1.3      Authentication

UniMRCP binary packages are available to authenticated users only. In order to register a free account with UniMRCP, please visit the following page.




Note: a new account needs to be verified and activated prior further proceeding.

2       Installing Deb Packages Using Apt-Get

Using the APT package handling utility (apt-get) is recommended for installation of UniMRCP binary packages.

2.1      Repository Configuration

Supply login information by creating a file /etc/apt/auth.conf.d/unimrcp.conf containing the following entry.


machine unimrcp.org

login username

password password


Note: the username and password fields must be replaced with the corresponding account credentials.


Configure a repository by creating a file /etc/apt/sources.list.d/unimrcp.list containing the following entry.


deb [arch=amd64] https://unimrcp.org/repo/apt/ distr main


Note: the distr field must be replaced with the corresponding distribution code name such as xenial, bionic, focal, etc. To determine the distribution code, use `lsb_release -cs`.

2.2      GnuPG Key

For verification of binary packages, UniMRCP provides a public GnuPG key, which can be retrieved and installed as follows.


wget -O - https://unimrcp.org/keys/unimrcp-gpg-key.public | sudo apt-key add -


2.3      Repository Update

In order to check for updates and apply the changes in the APT configuration, use the following command.


sudo apt-get update


2.4      Watson SR Plugin Installation

In order to install the Watson SR plugin, including all the dependencies, use the following command.


sudo apt-get install unimrcp-watson-sr


As a result, apt-get will check and prompt to download all the required packages by installing them in the directory /opt/unimrcp.

In order to install the additional data files for the sample client application umc, the following command can be used.


sudo apt-get install umc-addons


Note: this package is optional and provides additional data which can be used for validation of basic setup.

3       Installing Deb Packages Manually

UniMRCP deb packages can be installed manually using the dpkg utility. Note, however, that the system administrator should take care of package dependencies and install all the packages in appropriate order.


The deb packages have the following naming convention:





         packagename is the name of a package

         universion is the UniMRCP version

         distr is the distribution code name (trusty, xenial, )

         arch is the architecture (amd64, i386, all, )

3.1      Package List

The following is a list of UniMRCP deb packages required for the installation of the Watson SR plugin.


Package Name



Watson SR plugin to the server.


UniMRCP edition of the libevent library.


Sample en-US data files used with umc. [Optional]


Node information retrieval tool, required for license deployment.


Shared library and application of the server.


Shared libraries and sample applications of the client. [Optional]


Set of demo plugins to the server. [Optional]


Data common for the client and the server.


UniMRCP edition of the Apache Portable Runtime (APR) library.


UniMRCP edition of the Apache Portable Runtime Utility (APR-Util) library.


UniMRCP edition of the Sofia SIP library.

3.2      Package Installation Order

Packages for APR, APR-Util and Sofia-SIP libraries must be installed first.


sudo dpkg --install uniapr_$aprversion-$distr_$arch.deb

sudo dpkg --install uniapr-util_$apuversion-$distr_$arch.deb

sudo dpkg --install unisofia-sip_$sofiaversion-$distr_$arch.deb


Then, a package containing common data for the client and the server, and a package for the server should follow.


sudo dpkg --install unimrcp-common_$universion-$distr_$arch.deb

sudo dpkg --install unimrcp-server_$universion-$distr_$arch.deb


Next, a package containing the utility tool unilicnodegen, required for license deployment.


sudo dpkg --install unilicnodegen_$toolversion-$distr_$arch.deb


Next, a package containing the libevent library.


sudo dpkg --install unilibevent_$libeventversion-$distr_$arch.deb


Finally, a package containing the Watson SR plugin should follow.


sudo dpkg --install unimrcp-watson-sr_$universion-$distr_all.deb


4       Obtaining License

The Watson SR plugin to the UniMRCP server is a commercial product, which requires a license file to be installed.

4.1      License Type

The following license types are available:



         Test and Development

4.2      Node Information

The license files are bound to a node the product is installed on. In order to obtain a license, the corresponding node information needs to be retrieved and submitted for generation of a license file.


Use the installed tool unilicnodegen to retrieve the node information.


sudo /opt/unimrcp/bin/unilicnodegen


As a result, a text file uninode.info will be saved in the current directory. Submit the file uninode.info for license generation to services@unimrcp.org by mentioning the product name in the subject.

4.3      License Installation

The license file needs to be placed into the directory /opt/unimrcp/data.


sudo cp umswatsonsr_*.lic /opt/unimrcp/data

5       Obtaining Service Credentials


Instructions provided in this section are for the new IAM token based authentication, supported since WSR 1.4.0. The legacy username and password based authentication is no longer supported.


In order to utilize the IBM Watson Speech to Text API, corresponding service credentials need to be retrieved from the IBM Cloud portal and further installed to the UniMRCP server.

5.1      Watson Speech to Text API Subscription

Subscribe to the Watson Speech to Text API and obtain the credentials.


1.       Navigate to the Speech to Text API portal.


2.       Log in and create a service.

3.       Select the Service credentials tab and create a new credential.

4.       View and copy the credentials, which should be available in the following format


"apikey": "3df... ...Y7Pc9",

"iam_apikey_description": "Auto generated apikey during resource-key operation for...",

"iam_apikey_name": "auto-generated-apikey-31b336bc-2d6a-41c3-a8b2-e05ec6db19b4",

"iam_role_crn": "crn:v1:bluemix:public:iam::::serviceRole:Manager",

"iam_serviceid_crn": "crn:v1:bluemix:public:iam-identity::a/57d48380...::serviceid:...",

"url": "https://gateway-lon.watsonplatform.net/speech-to-text/api"



5.2      Installation of Credentials

Paste the credentials into a text file watsonsr.credentials, which needs to be placed to the directory /opt/unimrcp/data.


nano /opt/unimrcp/data/watsonsr.credentials


6       Configuring Server and Plugin

6.1      Plugin Factory Configuration

In order to load the Watson SR plugin into the UniMRCP server, open the file unimrcpserver.xml, located in the directory /opt/unimrcp/conf, and add the following entry under the XML element <plugin-factory>. Disable other recognition plugins, if available. The remaining demo plugins might also be disabled, if not installed.


<!-- Factory of plugins (MRCP engines) -->


<engine id="Demo-Synth-1" name="demosynth" enable="true"/>

<engine id="Demo-Recog-1" name="demorecog" enable="false"/>

<engine id="Demo-Verifier-1" name="demoverifier" enable="true"/>

<engine id="Recorder-1" name="mrcprecorder" enable="true"/>

<engine id="Watson-SR-1" name="umswatsonsr" enable="true"/>



6.2      Logger Configuration

In order to enable log output from the plugin and set filtering rules, open the configuration file logger.xml, located in the directory /opt/unimrcp/conf, and add the following entry under the element <sources>.


<source name=" WATSONSR-PLUGIN" priority="INFO" masking="NONE"/>


6.3      Watson SR Plugin Configuration

The configuration file of the plugin is located in /opt/unimrcp/conf/umswatsonsr.xml. Default settings should be sufficient for general use.


Refer to the Usage Guide for more information.


7       Validating Setup

Validate your setup by using the sample UniMRCP client and server applications on the same host. The default configuration and data files should be sufficient for a basic test.

7.1      Launching Server

Launch the UniMRCP server application.


cd /opt/unimrcp/bin

sudo ./unimrcpserver


In the server log output, check whether the plugin is normally loaded.


[INFO] Load Plugin [Watson-SR-1] [/opt/unimrcp/plugin/umswatsonsr.so]


Next, check for the license information.




-product name: umswatsonsr

-product version: 1.0.0

-license owner: -

-license type: trial

-issue date: 2018-06-28

-exp date: 2018-07-28

-channel count: 2

-feature set: 0


7.2      Launching Client

Note: the optional package umc-addons must be installed for this test to work.


Launch the sample UniMRCP client application umc.


cd /opt/unimrcp/bin



Run a typical speech recognition scenario by issuing the command run gsr1 from the console of the umc client application.


run gsr1


This command sends a RECOGNIZE request to the server and then starts streaming a sample audio input file callsteve.pcm to recognize.


Check for the NLSML results to be returned as expected.


<?xml version="1.0"?>


<interpretation grammar="command" confidence="0.92">

<instance>call Steve</instance>

<input mode="speech">call Steve</input>




Visually inspect the log output for any possible warnings or errors.


Note that utterances are stored in the var directory, if the corresponding parameter is enabled in the configuration file umswatsonsr.xml and/or requested by the client.